Control Panels Accessories
• Power supply unit - 30W /1.5A/12VDC, battery backup
Type MCS-PS30-U12
The power supply unit is specially designed to cover the additional power needs for external periphery such as lock, electro magnets, door release, managed from access control panels: MCS-AC01-6S2/6L2/6S4/6L4.
It is enclosed in same tampered steel box, as MCS-AC01-6L2/6L4.
This allows good looking view in case of installation of several control panels.
Technical data:
• Supply voltage (typical): 230 VAC, ±10% / 50 Hz
• Power consumption: max. 35W
• Battery backup: 12 VDC / 7 Ah
• Operating temperature: -10 ~ +65 °C
• Operation humidity: 90%
• Dimensions (H x W x D): 250 x 285 x 80 mm
• Housing protection: IP30, IP31
• Weight (without battery): 1.900 kg
• Expansion board - 16 analogue Inputs
Type MCS-AC01-E16
The board is designed to expand with 16 analogue inputs the access control panels: MCS-AC01-6S2/6L2/6S4/6L4. The board has direct slot connection and fully programmed, as a part of the above control panels.
• Expansion board - 4 relay outputs
Type MCS-AC01-E16
The board is designed to connect to open collectors outputs of access control panels: MCS-AC01-6S2/ 6L2/6S4/6L4, in case of additional needs from relay outputs. The relay contacts are 15A/24VDC. It can be fitted in the same metal box of the control panels.
• Expansion board - 4 automatic-fuse protected outputs
Type MCS-AC01-ECB1
The board is designed to split the output power of 12VDC from the access control panels: MCS-AC01- 6S2/6L2/6S4/6L4 to 4 automatic-fuse protected outputs 12VDC for powering the external peripheral devices. It can be fitted in the same metal box of the control panels.
• Expansion board network Repeater/Isolator
Type MCS-AC01-RIO2
The controller allows expanding the network length with another 1000m and protecting the network from short circuit. This controller can be used also for creating different structures of the network, branches and closed loop network connection for special and high-risk applications. It can be fitted in the same metal box of the control panels.
• PC connection network controller - RS232
Type MCS-AC01-RIO2
The controller allows the connection of MCS-AC01-6S2/6L2/ 6S4/6L4 network to PC via RS232 interface 9 pin flexible cable. Led control status indication of the network.
• PC connection network controller - USB2.0
Type MCS-AC01-CIO4
The controller allows the connection of MCS-AC01-6S2/6L2/ 6S4/6L4 network to PC via USB2.0 interface flexible cable. Led control status indication of the network.
• LAN connection network controller
Type MCS-AC01-LAN
The controller allows the connection of MCS-AC01/1204/0412 network to LAN via TCP/IP or UDP interface RJ45 flexible cable. Local LED status indication of the network.
• Power supply unit - 30W /1.5A/12VDC, battery backup
Type MCS-PS30-U12The power supply unit is specially designed to cover the additional power needs for external periphery such as lock, electro magnets, door release, managed from access control panels: MCS-AC01-6S2/6L2/6S4/6L4.
It is enclosed in same tampered steel box, as MCS-AC01-6L2/6L4.
This allows good looking view in case of installation of several control panels.
Technical data:
• Supply voltage (typical): 230 VAC, ±10% / 50 Hz
• Power consumption: max. 35W
• Battery backup: 12 VDC / 7 Ah
• Operating temperature: -10 ~ +65 °C
• Operation humidity: 90%
• Dimensions (H x W x D): 250 x 285 x 80 mm
• Housing protection: IP30, IP31
• Weight (without battery): 1.900 kg
• Expansion board - 16 analogue Inputs
Type MCS-AC01-E16The board is designed to expand with 16 analogue inputs the access control panels: MCS-AC01-6S2/6L2/6S4/6L4. The board has direct slot connection and fully programmed, as a part of the above control panels.
• Expansion board - 4 relay outputs
Type MCS-AC01-E16The board is designed to connect to open collectors outputs of access control panels: MCS-AC01-6S2/ 6L2/6S4/6L4, in case of additional needs from relay outputs. The relay contacts are 15A/24VDC. It can be fitted in the same metal box of the control panels.
• Expansion board - 4 automatic-fuse protected outputs
Type MCS-AC01-ECB1The board is designed to split the output power of 12VDC from the access control panels: MCS-AC01- 6S2/6L2/6S4/6L4 to 4 automatic-fuse protected outputs 12VDC for powering the external peripheral devices. It can be fitted in the same metal box of the control panels.
• Expansion board network Repeater/Isolator
Type MCS-AC01-RIO2The controller allows expanding the network length with another 1000m and protecting the network from short circuit. This controller can be used also for creating different structures of the network, branches and closed loop network connection for special and high-risk applications. It can be fitted in the same metal box of the control panels.
• PC connection network controller - RS232
Type MCS-AC01-RIO2The controller allows the connection of MCS-AC01-6S2/6L2/ 6S4/6L4 network to PC via RS232 interface 9 pin flexible cable. Led control status indication of the network.
• PC connection network controller - USB2.0
Type MCS-AC01-CIO4
The controller allows the connection of MCS-AC01-6S2/6L2/ 6S4/6L4 network to PC via USB2.0 interface flexible cable. Led control status indication of the network.
• LAN connection network controller
Type MCS-AC01-LANThe controller allows the connection of MCS-AC01/1204/0412 network to LAN via TCP/IP or UDP interface RJ45 flexible cable. Local LED status indication of the network.
Download Documents:
Network Panels - Accessories, Components and Spare Parts
(96.9kB)